Solids Control System
A solids control system is full sets of equipment used together to separate the solids in the drilling fluids, enabling drilling fluid recycling, it is also called mud purification system. KOSUN solids control system is the best in China since 1992.
A solids control system usually includes
five stages: mud tank, shale shaker, vacuum degasser, desander, desilter, and
centrifuge. The shale shaker is used to separate big solids with diameter above
75μm, the desander separates solids from 45-74μm, and the desilter separates
solids between 15-44μm. Sometimes the desander and desilter are combined as one
high efficiency mud cleaner. When air enters the drilling fluids, a vacuum
degasser is used to separate the air. When there is no air in the mud, the degasser
works as a big agitator. All these stages are mounted on the top of the mud
tank. After separating the solids, the clean mud can be pumped into the
borehole again.
KOSUN manufacture below solids control
system so far, with first class quality in China.
KOSUN HDD mud recovery system is a standard
design type and it can be divided according to different capacities.
TUNNEL BORING MUD SYSTEM (TBM)
TUNNEL BORING MUD SYSTEM (TBM)
KOSUN KD Series Separation System is of
modular system construction. It is designed for the treatment of all kinds of
slurries used in common construction techniques.
KOSUN drilling mud System enables the
overall system to meet the requirements of various well depths and drilling
fluids.
KOSUN mobile solids control system for
satisfying the drilling requirements on time reduction, moving speed
improvement and cost trimming.
KOSUN is able to customize its system to
produce the arctic solids control system which is solely applied under
extremely cold temperature to meet the requirements of the polar cold ( minus
40 degrees centigrade ) working conditions.
Learn more about KOSUN solids control
system, please visit www.kosun.com, or email
Jade at xiaolei.li@kosun.com.
www.kosuneco.com
www.kosuneco.com
Comments
Post a Comment